- Model Micro-Centurion II
200 Amp Micro-Ohm Meter
|
|
| Description |
|
The Micro-Centurion
II was designed for a high degree of accuracy for
the measurement of very low resistance. This technology was
then packaged into a portable test system for use by apparatus
manufacturers, rebuild shops, and electrical maintenance crews.
- This intelligent system has an easy to use operation
screen, which allows quick
selection of the current level and resistance level to be
measured. The system has the ability to detect the resistance
level and suggest the correct range to select which provides
for extremely accurate results.
- This system has a newly designed technique of measurement
which incorporates a high precision measurement circuit
and modular power source. High precision standards and extensive
filtering are used within the test set. The system is capable
of precision measurements to 200 A.
- The Micro-Centurion II applies a preset current level
and resistance range selected by the user. The results of
the test are then displayed within a few seconds automatically.
These results are reported on the easy to read liquid crystal
display and can be stored or printed out.
|
| |
|
|
| |
|
|
|
|
Specifications |
|
Model: Micro-Centurion II
Size: L: 20.5 in. (521 mm) W: 17 in. (432 mm) H: 8.5 in. (216 mm)
Weight: 31.5 lbs. (14.4 kg)
Input Power: 100 to 250 Vac (1kW max.), 50 / 60 Hz, Automatic ranging
Test Current: User Selectable: 200, 100, 50, 20, 10 Ampere
Panel Display: LCD Graphic with back lighting
Front Panel: Sealed anodized with a multi-actuation rotary knob
Interface: 9 Pin RS232 Serial / 25 Pin Centronics Parallel
Memory Storage: Stores up to 2000 complete test results.
|
|
|
|
|
|
|
Measurement Parameters |
| |
|
|
Current Range
|
|
Measuring Range
|
|
Accuracy
|
|
Resolution
|
|
|
|
|
|
|
|
|
200 Amp
|
|
0.01 µ  ...20
m |
|
±0.2% Rdg ±2 Digits
|
|
0.01 µ |
|
|
|
|
|
|
|
|
100 Amp
|
|
0.02 µ ...40
m |
|
±0.2% Rdg ±2 Digits
|
|
0.01 µ |
|
|
|
|
|
|
|
|
50 Amp
|
|
0.04 µ
.. 100 m |
|
±0.4% Rdg ±3 Digits
|
|
0.05 µ |
|
|
|
|
|
|
|
|
20 Amp
|
|
1.0 µ
.. 1.0 |
|
±0.4% Rdg ±3 Digits
|
|
0.1 µ |
|
|
|
|
|
|
|
|
10 Amp
|
|
1.0 µ
.. 5.0 |
|
±0.4% Rdg ±3 Digits
|
|
0.2 µ |
|
| |
|
Resistance Range:
0.01 µ
to 5
|
|
|
|
| Measuring
Duty Cycle: 200 A 10 min. on 5 min off. 100 A and below continuous |
|
|
|
- Temperature:
Operating: 10°
C to 60° C
Storage:
20° C to 70° C
|
|
|
|
|
|
|
Features |
• Automatic measurements of Low Resistance from 0.01 m W ...5 W
• Pure filtered DC Power source for the highest accuracy readings
• Microprocessor based system with internal storage for test results
• Single or continuous measurements with automatic data storage
• Automatic shut off for over-temperature condition
• Safety Emergency shut off switch
• Complete automatic calibration system and system diagnostics
• Centronics (Parallel) Interface & RS232 (serial) Interface
• 5 Year standard warranty
|
|
|
|
|
Standard Accessories |
• Current and Potential lead set – 5 meters in
length, each, 4 wires total
• Ground cable - 5 meters in length
• Heavy duty power cord – 9 ft. in length
• Operation manual
• Test Certificate
|
|
|
|
|
|
|
|
Optional Accessories |
|
• MC01 - 200A Kelvin test lead set
• MC02 - Custom clamping devices (user specified)
• MC03 - Internal panel mount printer
• MC04 - External temperature probe assembly
|
|
|
|
| |
|
|
SPECIFICATIONS ARE SUBJECT TO IMPROVEMENT AT
ANY TIME. |
|
|
